The MCD 30/5 PH portable clinching frame is a sturdy, light-weight machine with one-hand control. This clinching frame has been specially designed for mobile use. The frame is connected to the hydraulic unit with a 6 m hydraulic hose. Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task.
Technical data
| Drive | Hydraulic |
| Stroke frequency | Single stroke |
| Press force | 50 kN at 500 bar |
| For clinching options | S-DF, R-DF 6 and R-DF 8, G-DF 6 and G-DF 8 |
| Throat, horizontal | 30 mm |
| Throat, vertical | 34 (12.5 / 21.5) mm |
| Stroke | 6 mm |
| Max. total thickness | 3.0 mm steel and Aluminium* |
Weight | 4.0 kg (without hose) |
| Hose length | 6 m |
*The max. total thickness refers to steel and aluminium alloys with good forming properties, an elongation at break A80 ≥ 12 % and a yield-to-tensile ratio Rp0.2 / Rm ≤ 0.7. Examples: steel: DC04 • DX56 • CR180BH; aluminium: AlMg3 • AlMg4.5Mn0.4 • AlMg0.4Si1.2(T4). Deviations from these workpiece thickness combinations might be possible. For details, contact ECKOLD.
