The MZD 25/3 PH portable clinching pliers are light in weight, ergonomically designed and extremely sturdy. As they are controlled with one hand, they can be used at points that are otherwise difficult to access. The pliers have been specially designed for mobile use. The joining direction (punch and die position) is changeable.
Technical data
| Drive | pneumohydraulic |
| Stroke frequency | single stroke |
| Press force | max. 30 kN at 500 bar |
| Air consumption | 15 l per stroke |
| Working stroke | pressure dependent |
| For clinching options | S-DF |
| Max. total thickness | 3.0 mm steel and Aluminium* |
| Cycle time joining process | approx. 2 sec. |
| Throat, vertical | 2 x 15 mm |
| Throat, horizontal | 25 / 35 mm |
| Gap | 6 mm |
| Width in working area | 50 mm |
| Length/Width/Heigth | max. 260 / 57 / 214 |
| Weight (net) | 4.5 kg (without hose) |
| Hose length | 3 m |
*The max. total thickness refers to steel and aluminium alloys with good forming properties, an elongation at break A80 ≥ 12 % and a yield-to-tensile ratio Rp0.2 / Rm ≤ 0.7. Examples: steel: DC04 • DX56 • CR180BH; aluminium: AlMg3 • AlMg4.5Mn0.4 • AlMg0.4Si1.2(T4). Deviations from these workpiece thickness combinations might be possible. For details, contact ECKOLD.
